Then when it gets to the American Megatrends screen, the BOOT_DEVICE_LED goes solid and stays like that until the thing shuts itself down. None of them stay solid, they just blink on randomly at different times while warming up. Side note, but I was really really hoping I wouldn't have to RMA this board :/ I have a big LAN to go to tomorrow and I was desperately hoping to have the new rig up and running for it.ĪDDITIONAL INFO: Not sure if it matters, but while it is attempting to boot, all 4 of the Q LED lights go red. All I need to do to get the Vishera up and working is a simple BIOS flash, and of course, I can't get past the splash screen to access BIOS. This wouldn't be so annoying if I didn't have the solution to my main issue sitting on this USB drive. I might try to rig up a different power supply and see if maybe the PSU is to blame. I also tried the newer RAM, being a different brand and speed.
American megatrends bios update 0406 ps2#
Unfortunately I don't have a PS2 keyboard handy.Īlso since creating the thread, I have also attempted different sticks of RAM, in case there was a dead stick or something. 3 times for each, once in each of the different USB version slots.
Just tried it with 2 different USB keyboards. Should that not be an option try an old PS2 Keyboard.that seems to have done the trick for those that still had problems. If that fails try a different Keyboard because others have had problems with some Keyboards. Sofar so good, the only things I can tell you is try plugging you KB and Mouse in to the BLACK USB Ports on the back, I have found that problems pop up when I plug in to the other ports(RED(USB 3.0) BLUE(USB 2.0)), like Can't get into BIOS or GPU DIMM POST locks the system up. G.Skill Ripjaw X 8GB stick of DDRMHz (also tried a 4GB stick of Corsair Dominator DDR3 1333) _.ĮDIT: Derp, forgot the specs that matter. i'm kind of stumped, though.Īny help? I feel like this is something incredible simple. I tried checking my connections, RAM seating (1 stick of RAM in the farthest slot), removing the CMOS battery, and clearing CMOS via the jumpers. but I can't get into BIOS because the motherboard gets to here, and then shuts off. I have the new BIOS rom on a flash drive,ready to go. Please contact ASUS technical support for help. The data in the EC or EC Flash might be corrupted. "Please enter setup to recover BIOS setting. I can't even get into BIOS to flash, because it boots up, loads the American Megatrends screen, and gives me the following message. Lo-and-behold, I got the motherboard to post after installing an old Phenom II.ĪNYWAY, my new problem. Those aren't supported unless you have the new 1703 BIOS build." my friend finally pointed out a stupid error on my part by doing a simple google search. Tested PSUs, CPUs, RAM, Motherboards, etc. I did everything possible to try and get it working. For the past few days i've been having a lot of stress trying to get it working (i've built 3 builds in the past, but my issue this time has been the ever-so-vague red CPU Q LED being on).
0 kommentar(er)
